59 Pastry Products Potentially Contaminated with Metal

Tesco, Aldi and Nisa Recall Pastry Product Due to Potential Metal Contamination

On the 2nd June 2018, the Food Standards Agency announced that the Addo Food Group was recalling batches of chilled pastry products, including sausage rolls, pasties, pastry pies and slices because of potential contamination with small pieces of metal wire.  This is the latest food safety recall due to metal contamination and the announcement comes seven days before the start of National Food Safety Week.

Addo Food Group manufacture the chilled pastry products as own-branded products for major UK supermarkets Tesco, Aldi and Nisa, as well as those produced under the Walls and Millers brands.  The extent of the recall is substantial, with 59 products being recalled.

How Does Metal Get Into Food?

Unfortunately, food product recalls due to metal contamination are relatively common with 6 Food Safety Scares reported by the UK Food Standards Agency in 2017.

Metal In Food-1127

However, with the correct combination of Magnetic Separators and Metal Detectors, such disastrous and costly product recalls should not happen.

Metal can enter the food production process at a number of stages:

  1. Metal can be present in the foodstuffs being delivered.  To prevent such an introduction of metal into the process, many food processors pass the in-feed material over Magnetic Separators and through Metal Detectors;
  2. Processing equipment wear and failure (e.g. screen break, pump collapse, etc) can cause metal to enter the process stream;
  3. Accidental introduction by people on site;

However, with the right combination of metal separation and detection equipment, such metal can be found and removed before any finished product leaves the production facility.

How To Prevent Metal Contamination

The vast majority of food processing plants have Magnetic Separators and Metal Detectors installed.  Many of these have been in operation for many years which, in some cases, can be decades.

Bunting Magnetics Pull Test Kit
Demonstration of how to use the Bunting Magnetics pull test kit to measure the strength of Tube Magnets and Plate Magnets

During some recent Magnetic Separator Audits at UK food processing plants, we have found Magnetic Separators that have been:

  • Damaged and no longer have any magnetic strength;
  • Moved and are positioned in such a way that it is very unlikely to capture any metal contamination;
  • Cleaned too infrequently, resulting in a substantial build up of captured metal until the magnet face is full and the Magnetic Separator no longer operates;
  • Purchased and installed without any check of the magnetic strength, which subsequently turns out to the very weak;
  • Installed many years previously and now provides limited protection due to the poor magnetic strength;

To prevent metal contamination problems, it is advisable to have an annual audit by an external third party.  This audit then forms part of the quality and safety management system.

It will be interesting to determine the cause of the latest food recall due to metal contamination, but it will take longer to damage the reputation of the manufacturer Addo Food Group and consumer confidence in the affected products.

For more information on the issue of Metal Contamination and Metal Separation, or to arrange a free onsite survey and audit of a particular plant or process, please contact the Bunting team on:

Phone:  +44 (0) 1442 875081

Email:  sales@buntingeurope.com

Via the website

 

 

 

2 thoughts on “59 Pastry Products Potentially Contaminated with Metal

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s