24 Drawer Filter Magnets Destined for France

Metal Removed From Plastics

24 Drawer Filter Magnets are under manufacture at our European HQ in Berkhamsted, UK.  The Drawer Filter Magnets are destined for installation in a plastics production operation in France.

Bunting_Drawer_Filter_Magnets-8
Drawer Filter Magnets at an early stage of manufacture

“The Drawer Filter Magnet is one of our most popular magnetic separators,” said Dave Hills, Bunting’s Head of Sales.

The order for the Drawer Filter Magnets was secured by Bunting’s local representative in France, BMS.  BMS specialise in providing technical support to the plastics sector.

Drawer Filter Magnet Specification

All 24 Drawer Filter Magnets have the same specification:

  • Model:  LP-1600-PL: Low Profile Drawer Filter Magnet
  • Magnets:  Three (3) high strength Neodymium Rare Earth Magnets;, three 25mm diameter stainless steel
  • Dimension of the opening:  150mm square
  • Height:  180mm
  • Rows of Magnets:  One
  • Flanges:  Bottom and top included, 6.35mm thick
  • Slide gate:  6.35mm thick
  • Viewing port:  Unit features a 9.5mm thick clear polycarbonate drawer front

Application

During the manufacturing process of any plastic or plastic product, it is possible for metal to be introduced into the process.  This could be from a wide variety of sources including the wear of processing machinery.

Bunting_Drawer_Filter_Magnets-0346

If metal contamination is not removed, it can damage processing equipment and result in increased final product rejects.  The Drawer Filter Magnets are used to attract, hold and thus remove any magnetically susceptible metal contamination.

Another Export Order

“This is another great export order for Bunting,”said Hills.  “Despite all the concerns about BREXIT, we continue to work hard supporting our regionally based distributors.  This is paying dividends as our sales overseas continue to rise.”

For further information about metal separation equipment designed for removing metal during the plastic or plastic product manufacturing process, please visit our website or contact us on:

Phone: +44 (0) 1442 875081
Email: press@buntingeurope.com
Via the website

Other Plastics Industry Articles

 

Record Number of Exhibitions for Bunting in 2018

Where To Meet Bunting and Master Magnets in 2018

In 2018, the Bunting and Master Magnets team will be exhibiting at 14 industry shows across Europe.

“This will be our most active year for exhibitions,” said Dave Hills, Bunting’s Head of Sales.  “Being visible at exhibitions and congresses in 2016 and 2017 has been really important in building our identity and growing our sales.  We want to take our technology to our potential customers and show them what it can do.”

The full exhibition and congress schedule is:

January

Bunting at IERC Jan 1817th International Electronics Recycling Congress IERC2018 (Salzburg, Austria, 17-19 January).  The first congress of the year focused on E-waste (see the report – Changes in E Waste Management Highlighted at IERC 2018).  There was considerable interest in the Stainless Steel Separator;

April

Ceramitec (Munich, Germany, 10-13 April).  The leading international trade fair for ceramics and non-metallic minerals.  On show will be the Master Magnets range of mineral processing Magnetic Separators;

May

IFAT (Munich, Germany, 14-18 May).  The largest waste and recycling show in Europe.  Bunting now has one of the most complete ranges of Magnetic Separators and Metal Detectors for recycling including the:

Bunting Master Magnets at RWM17

June

Hillhead (Hillhead Quarry, Buxton, UK, 26-28 June).  The premier event for the aggregates and quarrying industry in the UK.  Master Magnets has attended for many years, exhibiting their industry-standard Metal Detectors and Overband Magnets;

July

July is a busy month with two exhibitions:

CARS (NAEC, Stoneleigh, UK, 11-12 July).  The Complete Auto Recycling Show focuses on the recovery, dismantling and recycling of the car.  Separating the metals is a vital stage of the process where companies use the Stainless Steel Separator, Eddy Current Separators, and Scrap Drum Magnets;

WasteExpo (Warwickshire Exhibition Centre, near Leamington Spa, UK 5th July).  The waste and skip trade exhibition run by Skip Hire Magazine where we are headline sponsors alongside Master Magnets.

September

RWM (NEC, Birmingham, UK, 12-13 September).  The largest waste and recycling exhibition in the UK.  Bunting and Master Magnets have been long-term supporters of the show and will have working Magnetic Separators on the stand.

October

Fakuma (Friedrichshafen, Germany, 16-20 October).  One of the leading plastics technology events in the world.  Bunting will be exhibiting Magnetic Separators and Metal Detectors used to remove metal contamination during the virgin plastic production process and also separators used during plastics recycling.

November

This will be a busy month for overseas exhibitions with events in Italy and France.

Ecomondo (Rimini, Italy, 6-9 November).  An international event with an innovative format that brings together all sectors of the circular economy in a single platform: from material and energy recovery to sustainable development.  The show is the ideal platform to promote Magnetic Separation equipment used in the recycling sector and we will be supporting our new representative, Ital Goods.;

Emballage (Paris, France, 26-29 November).  The international trade show gathers together industry stakeholders from the food, liquids, cosmetics, beauty, luxury goods, healthcare, pharmaceutical, retail and consumer goods sectors, offering them 4 days of meetings, demonstrations, innovation and presentations.  We will be on the stand of our local distributor, Pronix.  Magnetic Separators and Metal Detectors are used extensively in the processing industries;

Pollutec (Lyon, France, 27-30 November).  The international trade show for environmental and energy stakeholders working for economic performance.  The final recycling focused event of 2018 and we will be supporting our local distributor BMS France;

December

img_1144Plast Eurasia (Istanbul, Turkey, 5-8 December).  The major plastic show for Turkey and the Middle East.  Bunting has exhibited previously and will be helping visitors solve their metal contamination problems.  As in 2016, we will be on the stand of our local representative Tepro Makine.

“It is an ambitious and exhibiting exhibition schedule for 2018,” explained Dave.  “With the Master Magnets product range we are now able to offer total metal separation solutions.  Attending leading industry exhibitions is vital to understand the needs of the industry and demonstrate how we can help.”

For further information on any of the listed exhibitions or any aspect of Metal Separation or Detection, please contact us on:

Phone: +44 (0) 1442 875081
Email: sales@buntingeurope.com
Via the website

 

 

 

 

Our 2017 Review

A Look Back at Our News & Blogs from 2017

2017 has been another busy and exciting time for Bunting Magnetics Europe with some great news stories.  In this blog we look back at the past 12 months and review the stories that hit our headlines.

January

bunting_master_magnetsWe started the year by announcing that Bunting had acquired leading UK Magnetic Separator and Metal Detection company Master Magnets.  This changed the Magnetic Separator landscape in Europe.

At the same time, the Bunting team was exhibiting at the Arabplast exhibition in Dubai.  The plastics focused event was attended and visited by plastics professionals across the region.  Sales were even made on the stand!

Our 7th of our 8 Magnetic Separator Myths examined the impossibility of achieving 100% metal separation.

To finish off January, we announced record sales in 2016 despite the backdrop of Brexit and political uncertainty.

February

We started the month with our 8th Magnetic Separator myth, asking if it was possible to block a magnetic field.

Bunting also joined the British Plastics Federation, reflecting our longtime involvement in the sector providing metal separation solutions.

Bunting at Exposolidos 2017

Our exhibition focus in the month was Exposolidos in Spain with our local representative SMED Tecnica.

In February, we also asked the question of whether our Environmental future is simple down to design?  This was written in response to the growing awareness of the environmental impact of waste that would gradually intensify through the year.

We finished off the month with the launch of the Teardrop Tube Magnet, ideal for use in fine powders where bridging might be an issue.

March

The strength of a Magnetic Separator is often expressed in ‘gauss’.  However, the vast majority of people are unable to measure gauss and so we showed a simple practical way to check the magnetic power using a simple spring balance.

Our 9th Magnetic Separator myth highlighted the dangers of strong Magnets and our 10th myth looked at ways to easily and safely clean captured metal off  Magnetic Separators.

We also investigated a US FDA report stating the ‘Ingesting Metal Fragments Can Cause Injury‘.

In March, we exhibited at the Southern Manufacturing and Electronics show in Farnborough UK.

April

Metal is commonly found in spices and we examined a typical plant and identified the best locations for Magnetic Separators and Metal Detectors.

We also reported that we sold a record number of Plate Magnets in 2016 for export to Indonesia and 28 In-Line Magnets to a German baby food producer.

New Bunting Sales EmployeesWith the continued growth of the business, we were thrilled to announce the appointment of two new sales engineers, Tom Higginbottom and Gordon Kerr.

In April, UK supermarket Morrisons was hit by a metal-in-food scare and we looked at how this could have happened and ways in which such a problem could have been prevented.

May

Our Food Safety theme continued in May when, during a metal separation survey, we found large amounts of metal safely captured when processing rice.  Our Perfect Plant review assessed the best methods and equipment location to ensure that metal is removed from Processed Vegetables.

Exports continued to proved successful with the shipment of a HFS Drawer Magnet to a Plastics recycling company in France.

Our technical review in May reviewed the effect of high temperatures on Rare Earth Magnetic Separators.

June

There was a political flavour to news in June after the UK’s general election and we investigated what the leading parties were promising with regards to the environment.  At the same time, Bunting and Master Magnets were jointly exhibiting at Waste 17, a major UK recycling show in Manchester.

The week after, Bunting supported local representative BMS France at the FIP Solution Plastique exhibition in Lyon, France.

To mark the UK’s Food Safety Week, we reviewed recent cases of ‘metal’-in-food’ and the potential implications for the manufacturer, sales outlet, and customer.

July

Denis_Elkins_Bunting_Magnetics_Europe-2176In July, we were thrilled to announce the successful transition to ISO9001 2015 Quality and the ISO14001 2015 Environmental Standards.

In the media there was increasing attention on the issue of plastic waste in the environment and we commented on the necessity of a global strategy for Plastic Waste.

August

The environmental theme continued in August asking if the UK could realistically increase their metal packaging recycling rate by 10% by 2020.

September

As a prelude to RWM17, the UK’s largest waste and recycling show, we looked at 3 UK Waste and Recycling Facts such as asking how much waste do we actually generate?

Bunting Master Magnets at RWM17

After exhibiting at RWM, there were many questions being asked by exhibitors and visitors about the future of the event despite the importance of recycling and the global waste problem.

October

Bunting Magnetics Europe at Interplas 2017

The UK’s leading plastics show, Interplas, is held every 3 years and, as in previous years, it was very well supported by both exhibitors and visitors.  The environmental issues associated with plastic waste was gathering momentum.

Removing metal from fine powders can be extremely difficult and we produced a technical report looking at the best techniques and ideal equipment.

Tom Higginbottom attended the successful Bulk Solids & Powders show SyMas in Poland with the local Bunting representative TEKPRO.

November

The Manufacturing and Engineering industries have been concerned about the lack of young engineers and hopefully initiatives such as Tomorrow’s Engineers Week will help address this issue.

We were also excited to report two consecutive record sales months in September and October.  2017 was proving to be as successful as 2016.

Our latest Perfect Plant review focused on the brewing of beer and ensuring that all metal is removed to protect delicate processing equipment and the taste of the beer.

December

Pantomine BlogThe BBC TV series Blue Planet had highlighted the global problem of plastic waste in our oceans.  However, as the pressure increased on the plastics sector, we asked whether Plastic was the Pantomime Villain of the recycling world?

We hope you have enjoyed reading our news and blogs in 2017.  If there are any topics that you would like reviewed, then please get in touch and send an email to Paul our press officer (press@buntingeurope.com).

For further information on Magnetic Separators or Metal Detectors please contact the Bunting team on:

Export Success at FIP Solution Plastique Exhibition

Bunting Magnetics Support BMS France at Plastics Show in France

Dave Hills, Bunting Europe’s Head of Sales, was on the stand of local distributor, BMS France for the duration of the major annual international plastics exhibition, FIP Solution Plastique, held in Lyon, France between 13th and 16th June 2017.  Dave gave us this report:

“Last week [13th to 16th June] it was hot and humid in Lyon.  And it was debatable whether the air conditioning in the exhibition centre was actually working.  However, the turnout for the show was fantastic.

FIP Solution Plastique is the number 1 show for the plastics sector in France.  There was a technically and globally diverse group of exhibitors present, all specialising in working in the plastics industry.

We were present to support our local distributor BMS France.  Being on the stand gave me the opportunity to develop relationships with the BMS team, deliver some product training, and also learn about the plastics market in France.  I also had the opportunity to meet the BMS Spain team, based in Barcelona.

It was also good to meet and talk with other equipment suppliers, many of who had equipment on display at the show.  It was interesting to hear their feedback on present market conditions.  We find exports visits such as this invaluable.

Bunting_FIP_Solution_Plastique_France-1987

Along with our Metal Detectors and Magnetic Separators, BMS had a wide range of equipment on the stand.  There were 3 operating Boy Injection Moulding Machines on one stand and a Woojin Injection Moulding Machine on a 2nd stand.

There were also 5 Wanner Granulators, and Pixargus had a live demonstration of their unique surface inspection and dimension measurement system.

The extensive range of products and the interactive nature of the BMS France stand made it one of the busiest at the show.

Bunting_FIP_Solutions_Plastique_17-1985

It was interesting to think that all of the aforementioned equipment relies on the plastic pellets and raw materials being metal-free.  And getting metal out of plastic is our speciality.

BMS France was able to talk to visitors about a complete solution, with demonstrations of the quickTRON 03R Metal Detector and FF Drawer Filter Magnet removing both ferrous and non-ferrous metals.

Being in France also gave me an opportunity to hear people’s thoughts about BREXIT.  Unlike some other European countries that I have visited since the referendum, people in France have a very negative opinion about the UK leaving the EU.  In fact, many people asked whether the decision could be overturned.  This just highlights the importance of a negotiated exit that involves free trade.

However, the atmosphere at the exhibition was very positive.  Indeed, BMS France sold 2 Injection Moulding Machines at the show, which was fantastic.  And both will be protected by Bunting Metal Detectors and Magnetic Separators.

An excellent show and we will be back in 2018.”

For further details on the Bunting range of Magnetic Separators and Metal Detectors used to remove metal from virgin and recycled plastic, please contact our technical sales team on:

Bunting_FIP_Solution_Plastique_France--2

Metal Detectors and Magnetic Separators at FIP Solution Plastique

Bunting Support BMS France at Major Plastics Show in France

Bunting Magnetics Europe distributor, BMS France, is exhibiting Metal Detectors and Magnetic Separators on stand D16/E13 at the FIP Solution Plastique show in Lyon, France (13th to 16th June 2017).  FIP Plastique Plastique has been the number 1 show for the plastics sector in France for over 30 years.

BMS France represent Bunting in France, providing local technical support to companies producing and recycling plastics.  BMS are based in Pringy and manufacture and distribute a wide range of products and equipment for the plastics industry.

Bunting_FIP_Solutions_Plastique_17-1982

“FIP provides the ideal platform to showcase a wide range of metal separation equipment,” said Dave Hills, Bunting’s Head of Sales.  Dave will be manning the stand with the BMS France team in Lyon.

On the stand, BMS will be showcasing Bunting equipment including:

Quicktron Metal Detector

Gravity free-fall style metal separators are designed specifically to isolate and separate any contaminated material moving in the product flow.  Ferrous and non-ferrous metals are automatically detected and removed from the product flow, without any interruption in the production process.

FF Drawer Filter Magnets

FF Series Draw Magnets are perfectly suited for collecting and separating contaminant ferrous metal from gravity fed, dry, free flowing materials.  Housed inside are the extremely strong Neodymium Rare Earth Magnets which capture and hold small pieces of ferrous metal contaminant.  Made specifically for the plastics industry, this is the only available drawer magnet design that features temperature-compensated rare earth magnets.Bunting_FIP_Solutions_Plastique_17-1985

Grate Magnets

Grate Magnets or Magnetic Grates are manufactured with a 25mm Tube Magnet from high quality 304 Stainless Steel, with 316 Stainless Steel as an option for high corrosive applications.  They are available for Square or Round Openings and with optional baffles.  Standard sizes range from 100mm to 1000mm.  These Grate Magnets can be placed in hoppers or feed pipes to collect ferrous metals and are ideally suited when they can be easily removed for cleaning.

“As a leading supplier to the plastics industry, it is important that we are here at FIP.  It gives us the opportunity to meet and talk to plastic producers about metal contamination issues,” said Dave.

For further details on the Bunting range of Magnetic Separators and Metal Detectors used to remove metal from virgin and recycled plastic, please contact our technical sales team on:

Other Articles Related to Plastics Recycling

PowerPoint Presentation