Record Number of Exhibitions for Bunting in 2018

Where To Meet Bunting and Master Magnets in 2018

In 2018, the Bunting and Master Magnets team will be exhibiting at 14 industry shows across Europe.

“This will be our most active year for exhibitions,” said Dave Hills, Bunting’s Head of Sales.  “Being visible at exhibitions and congresses in 2016 and 2017 has been really important in building our identity and growing our sales.  We want to take our technology to our potential customers and show them what it can do.”

The full exhibition and congress schedule is:

January

Bunting at IERC Jan 1817th International Electronics Recycling Congress IERC2018 (Salzburg, Austria, 17-19 January).  The first congress of the year focused on E-waste (see the report – Changes in E Waste Management Highlighted at IERC 2018).  There was considerable interest in the Stainless Steel Separator;

April

Ceramitec (Munich, Germany, 10-13 April).  The leading international trade fair for ceramics and non-metallic minerals.  On show will be the Master Magnets range of mineral processing Magnetic Separators;

May

IFAT (Munich, Germany, 14-18 May).  The largest waste and recycling show in Europe.  Bunting now has one of the most complete ranges of Magnetic Separators and Metal Detectors for recycling including the:

Bunting Master Magnets at RWM17

June

Hillhead (Hillhead Quarry, Buxton, UK, 26-28 June).  The premier event for the aggregates and quarrying industry in the UK.  Master Magnets has attended for many years, exhibiting their industry-standard Metal Detectors and Overband Magnets;

July

July is a busy month with two exhibitions:

CARS (NAEC, Stoneleigh, UK, 11-12 July).  The Complete Auto Recycling Show focuses on the recovery, dismantling and recycling of the car.  Separating the metals is a vital stage of the process where companies use the Stainless Steel Separator, Eddy Current Separators, and Scrap Drum Magnets;

WasteExpo (Warwickshire Exhibition Centre, near Leamington Spa, UK 5th July).  The waste and skip trade exhibition run by Skip Hire Magazine where we are headline sponsors alongside Master Magnets.

September

RWM (NEC, Birmingham, UK, 12-13 September).  The largest waste and recycling exhibition in the UK.  Bunting and Master Magnets have been long-term supporters of the show and will have working Magnetic Separators on the stand.

October

Fakuma (Friedrichshafen, Germany, 16-20 October).  One of the leading plastics technology events in the world.  Bunting will be exhibiting Magnetic Separators and Metal Detectors used to remove metal contamination during the virgin plastic production process and also separators used during plastics recycling.

November

This will be a busy month for overseas exhibitions with events in Italy and France.

Ecomondo (Rimini, Italy, 6-9 November).  An international event with an innovative format that brings together all sectors of the circular economy in a single platform: from material and energy recovery to sustainable development.  The show is the ideal platform to promote Magnetic Separation equipment used in the recycling sector and we will be supporting our new representative, Ital Goods.;

Emballage (Paris, France, 26-29 November).  The international trade show gathers together industry stakeholders from the food, liquids, cosmetics, beauty, luxury goods, healthcare, pharmaceutical, retail and consumer goods sectors, offering them 4 days of meetings, demonstrations, innovation and presentations.  We will be on the stand of our local distributor, Pronix.  Magnetic Separators and Metal Detectors are used extensively in the processing industries;

Pollutec (Lyon, France, 27-30 November).  The international trade show for environmental and energy stakeholders working for economic performance.  The final recycling focused event of 2018 and we will be supporting our local distributor BMS France;

December

img_1144Plast Eurasia (Istanbul, Turkey, 5-8 December).  The major plastic show for Turkey and the Middle East.  Bunting has exhibited previously and will be helping visitors solve their metal contamination problems.  As in 2016, we will be on the stand of our local representative Tepro Makine.

“It is an ambitious and exhibiting exhibition schedule for 2018,” explained Dave.  “With the Master Magnets product range we are now able to offer total metal separation solutions.  Attending leading industry exhibitions is vital to understand the needs of the industry and demonstrate how we can help.”

For further information on any of the listed exhibitions or any aspect of Metal Separation or Detection, please contact us on:

Phone: +44 (0) 1442 875081
Email: sales@buntingeurope.com
Via the website

 

 

 

 

Changes in E Waste Management Highlighted at IERC 2018

Future of Electronics Recycling Discussed at 17th International Electronics Recycling Congress

IERC 2018 closed on Friday 19th January 2018 with a stark warning that changes are needed in the global management of E-waste.  Attending the congress were 480 international experts from 42 countries.

WEEE E WasteBunting Magnetics Europe’s Managing Director, Simon Ayling, was at the congress for the first time.

“All the leading companies and organisations involved in E-waste were present at the congress,” said Simon.  “There was a very honest and open assessment of the present state of the industry, with a focus on what needs to change.”

Many visitors to the Bunting Magnetics stand had issues with separating Stainless Steel.

“Stainless steel is clearly a major issue when processing WEEE.  Up until now, it has been difficult to effectively [physically and economically] extract the stainless steel.  This then causes problems with shredder wear and the contamination of the end product.  With the HISC and SSSC, we have Magnetic Separation solutions for both small and large sized Stainless Steel.”

At IERC 2018, there was a focus on change.  As developing countries introduce tighter restrictions on the shipment of waste in general [EPPM – China raises drawbridge on incoming overseas plastic waste], a more holistic approach is needed.

New technology, like the Bunting Stainless Steel Magnetic Separator, and increased automation were identified as being vital to improve WEEE recycling rates.

Bunting Master Magnets at RWM17

The amount of E-waste is ever-increasing and the shrinking product size is making recycling increasingly difficult.  Rising collection costs and falling value of the end recycled product may lead to more localised e-recycling.  There also needs to be a clear political strategy with a standardisation of regulations.

WEEE E Waste“It was clear that the industry faces a challenging future,” observed Simon.  “Being able to successfully recycle WEEE can be prohibitively expensive and is further complicated with local and global environmental regulations.  Companies involved in processing E-waste are having to continually modify their businesses to survive in an ever-changing industry.  Hopefully, our Magnetic Separation technology will help.”

For further information on Metal Separation including Stainless Steel Recovery and Removal, or to assess the right Magnetic Separator or Metal Detector for a specific application, please contact us on:

Phone: +44 (0) 1442 875081
Email: sales@buntingeurope.com
Via the website

Metal Separation at IERC 2018

Bunting Exhibiting at 17th International Electronics Recycling Congress (17-19 January 2018)

IERC, the first major recycling event of 2018, is being held in Salzburg, Austria between the 17th and 19th of January.  For the first time, Bunting Magnetics will have a stand at the event.

During the 3 day congress, experts from around the world will discuss the latest issues facing the recycling world such as the Chinese ban on plastic waste imports and the continued drive towards electric vehicles.

Bunting Master Magnets at RWM17

Technology is always high on the agenda as new innovations make it possible to recover and separate an increasing number of valuable metals whilst reducing the amount of unusable waste.

Bunting has developed a wide range of Magnetic Separator technology.  Following the acquisition of Master Magnets in January 2017, Bunting is able to provide solutions to separate any metals.

Stainless Steel Separation

Stainless Steel becomes very weakly magnetic when bent or cut (as when passed through a shredder).  Bunting developed two new Magnetic Separators, the High Intensity Separation Conveyor (HISC), and the Stainless Steel Separation Conveyor (SSSC).  Both systems have ultra high magnetic fields that enable the attraction and deflection of Stainless Steel, enabling separation.  Production sized equipment was recently on display the RWM 17 exhibition in the UK.

Non-Ferrous Metal Separation

The Eddy Current Separator remains a vital part of any recycling process, separating and recovering non-ferrous metals.  Master Magnets have a number of Eddy Current Separator configurations enabling the separation of large and very small non-ferrous metals.  In 2017, Master Magnets manufactured and shipped a record number of Eddy Current Separators.  This is as a direct result of companies seeing their equipment’s superior separation capabilities.

General Ferrous Metal Separation

Separating metal at stages is the key to enabling the best recovery and purity of metal.  General Magnetic Separators are commonly used earlier in the process to recovery or remove ferrous metals and include:

Bunting Europe’s Managing Director, Simon Ayling, will be at the congress.  If you have a specific application, please see us on our stand.

In the meantime, for further information on Metal Separation or to assess the right Magnetic Separator or Metal Detector for a specific application, please contact us on:

Phone: +44 (0) 1442 875081
Email: sales@buntingeurope.com
Via the website