Scandinavian Exhibitions with Tekemas

Bunting Provide Technical Support at Two Overseas Shows

Local representative Tekemas has exhibited at two Autumn international trade shows in 2018.  The equipment displayed on their stands included a selection of Magnetic Separators.  Both exhibitions proved to be successful, with leads for both magnetic separation and metal detection equipment.

Tekemas is based in Rodovre, Denmark and specialises in providing solutions in the handling and processing of powders and granules.  They represent a number of international equipment and technology suppliers including Wysetech Materials Handling and Matcon.

Scanpack (Gothenburg, Sweden, 23-26 October 2018)

Tekemas Team at Scanpack 18
Tom Higginbottom (far right) with the Tekemas team

Scanpack is an international event for the packaging industry.  Exhibitors showcase solutions for the entire packaging process.  Visitors included managers, marketers, brand managers and others involved in packaging, from conception and design, through to production and logistics.  Representatives from companies based in over 40 countries attend the show.

Bunting’s Sales Engineer, Tom Higginbottom, attended the show.

“Overseas exhibitions provide an ideal opportunity to learn about the local markets,” Tom explained.  “The time I spent with the Tekemas team has been precious.  I was able to provide support with technical information and, potentially more importantly, develop my relationship with the Tekemas engineers.”

FoodTech (Herning, Denmark, 13-15 November 2018)

Tekemas_Stand_FoodTech18_4413
Dave Hills (left) with Fleming Petersen, owner of Tekemas

FoodTech is a food technology event, held every two years in MCH Messecenter Herning.  The exhibition is focused on showcasing the latest technology for the food manufacturing and processing sectors.

Tekemas were supported by Bunting’s Head of Sales, Dave Hills.

“Before I had even left the United Kingdom, Tekemas had arranged meetings on the stand with prospective customers,” said Dave.  “Supporting our local representatives at shows like this is so important.  The time can be used for product and application training as well as developing all-important relationships.  It has been a very successful show.”

Bunting and Master Magnets are continually searching for new overseas representatives in a wide range of industrial sectors.  For further information, contact Dave Hills on dhills@buntingeurope.com.

For further information on Magnetic Separators or Metal Detectors used in removing and detecting metal contamination in food, please visit our website or contact us on:

Phone: +44 (0) 1442 875081
Email: press@buntingeurope.com
Via the website

Our 2017 Review

A Look Back at Our News & Blogs from 2017

2017 has been another busy and exciting time for Bunting Magnetics Europe with some great news stories.  In this blog we look back at the past 12 months and review the stories that hit our headlines.

January

bunting_master_magnetsWe started the year by announcing that Bunting had acquired leading UK Magnetic Separator and Metal Detection company Master Magnets.  This changed the Magnetic Separator landscape in Europe.

At the same time, the Bunting team was exhibiting at the Arabplast exhibition in Dubai.  The plastics focused event was attended and visited by plastics professionals across the region.  Sales were even made on the stand!

Our 7th of our 8 Magnetic Separator Myths examined the impossibility of achieving 100% metal separation.

To finish off January, we announced record sales in 2016 despite the backdrop of Brexit and political uncertainty.

February

We started the month with our 8th Magnetic Separator myth, asking if it was possible to block a magnetic field.

Bunting also joined the British Plastics Federation, reflecting our longtime involvement in the sector providing metal separation solutions.

Bunting at Exposolidos 2017

Our exhibition focus in the month was Exposolidos in Spain with our local representative SMED Tecnica.

In February, we also asked the question of whether our Environmental future is simple down to design?  This was written in response to the growing awareness of the environmental impact of waste that would gradually intensify through the year.

We finished off the month with the launch of the Teardrop Tube Magnet, ideal for use in fine powders where bridging might be an issue.

March

The strength of a Magnetic Separator is often expressed in ‘gauss’.  However, the vast majority of people are unable to measure gauss and so we showed a simple practical way to check the magnetic power using a simple spring balance.

Our 9th Magnetic Separator myth highlighted the dangers of strong Magnets and our 10th myth looked at ways to easily and safely clean captured metal off  Magnetic Separators.

We also investigated a US FDA report stating the ‘Ingesting Metal Fragments Can Cause Injury‘.

In March, we exhibited at the Southern Manufacturing and Electronics show in Farnborough UK.

April

Metal is commonly found in spices and we examined a typical plant and identified the best locations for Magnetic Separators and Metal Detectors.

We also reported that we sold a record number of Plate Magnets in 2016 for export to Indonesia and 28 In-Line Magnets to a German baby food producer.

New Bunting Sales EmployeesWith the continued growth of the business, we were thrilled to announce the appointment of two new sales engineers, Tom Higginbottom and Gordon Kerr.

In April, UK supermarket Morrisons was hit by a metal-in-food scare and we looked at how this could have happened and ways in which such a problem could have been prevented.

May

Our Food Safety theme continued in May when, during a metal separation survey, we found large amounts of metal safely captured when processing rice.  Our Perfect Plant review assessed the best methods and equipment location to ensure that metal is removed from Processed Vegetables.

Exports continued to proved successful with the shipment of a HFS Drawer Magnet to a Plastics recycling company in France.

Our technical review in May reviewed the effect of high temperatures on Rare Earth Magnetic Separators.

June

There was a political flavour to news in June after the UK’s general election and we investigated what the leading parties were promising with regards to the environment.  At the same time, Bunting and Master Magnets were jointly exhibiting at Waste 17, a major UK recycling show in Manchester.

The week after, Bunting supported local representative BMS France at the FIP Solution Plastique exhibition in Lyon, France.

To mark the UK’s Food Safety Week, we reviewed recent cases of ‘metal’-in-food’ and the potential implications for the manufacturer, sales outlet, and customer.

July

Denis_Elkins_Bunting_Magnetics_Europe-2176In July, we were thrilled to announce the successful transition to ISO9001 2015 Quality and the ISO14001 2015 Environmental Standards.

In the media there was increasing attention on the issue of plastic waste in the environment and we commented on the necessity of a global strategy for Plastic Waste.

August

The environmental theme continued in August asking if the UK could realistically increase their metal packaging recycling rate by 10% by 2020.

September

As a prelude to RWM17, the UK’s largest waste and recycling show, we looked at 3 UK Waste and Recycling Facts such as asking how much waste do we actually generate?

Bunting Master Magnets at RWM17

After exhibiting at RWM, there were many questions being asked by exhibitors and visitors about the future of the event despite the importance of recycling and the global waste problem.

October

Bunting Magnetics Europe at Interplas 2017

The UK’s leading plastics show, Interplas, is held every 3 years and, as in previous years, it was very well supported by both exhibitors and visitors.  The environmental issues associated with plastic waste was gathering momentum.

Removing metal from fine powders can be extremely difficult and we produced a technical report looking at the best techniques and ideal equipment.

Tom Higginbottom attended the successful Bulk Solids & Powders show SyMas in Poland with the local Bunting representative TEKPRO.

November

The Manufacturing and Engineering industries have been concerned about the lack of young engineers and hopefully initiatives such as Tomorrow’s Engineers Week will help address this issue.

We were also excited to report two consecutive record sales months in September and October.  2017 was proving to be as successful as 2016.

Our latest Perfect Plant review focused on the brewing of beer and ensuring that all metal is removed to protect delicate processing equipment and the taste of the beer.

December

Pantomine BlogThe BBC TV series Blue Planet had highlighted the global problem of plastic waste in our oceans.  However, as the pressure increased on the plastics sector, we asked whether Plastic was the Pantomime Villain of the recycling world?

We hope you have enjoyed reading our news and blogs in 2017.  If there are any topics that you would like reviewed, then please get in touch and send an email to Paul our press officer (press@buntingeurope.com).

For further information on Magnetic Separators or Metal Detectors please contact the Bunting team on:

Review of the Bulk Solids and Powders Industry in Poland

Tom Higginbottom Reports Following Attending the SyMas Exhibition

Last week, our Sales Engineer Tom Higginbottom spent 2-days at the SyMas Bulk Solids and Powders exhibition in Krakow, Poland with Bunting’s local representative, TEKPRO.  Whilst at the show, he gained an insight into the present state of the market and potential opportunities for UK exporters.Bunting_at_SyMas17-17

Tom gives us his insight in the show, local feelings about BREXIT, and the market in general

“SyMas was a really good show with a busy footfall.  There was a lot of equipment on show, from manufacturers based all over the world.

From the type of enquiries and from talking to clients and our distributor, it is clear that the bulk solids and powders sector is growing.  Despite being a member of the EU, Poland remains an emerging nation and wages are still lower than in more developed European countries like the UK, Germany and France, but that gap is closing.  Their skill base is very high and consistently improving.

There is a lot of Western European investment and many of the manufacturing facilities are state-of-the-art.  This matched with the lower wage cost and workforce skills make the Poles very competitive in both European and global markets.

It was interesting speaking with the Poles about the UK leaving the European Union.  Generally, people thought that being a part of the EU makes it possible to compete with larger economies such as China and the USA.  Brexit has introduced an unknown factor and there was a feeling that, without the UK, the EU would have less negotiating power on the world stage.SyMas Tube Magnets 2

I think that the growth of our local representative TEKPRO highlights the expanding market and potential opportunities in Poland.  Since they were founded 10 years ago, they have expanded their workforce from 4 to 84 people.  It is an exciting time and we are working closely with them to maximise our sales potential in Poland.

At the show we received enquiries for both Magnetic Separator and Metal Detectors, including 3 specific projects where clients require Pneumatic Self Clean Drawer Filter Magnets and Drum Magnets.

Attending the SyMas show was really worthwhile and allowed me to gain an insight into the market which simply is not possible without being at the exhibition.

krakow

And Krakow was a beautiful city.  I have never been before and found the people wonderfully friendly and the historical buildings beautiful.”

For further information on removing metal contamination from bulk goods, powders and granules with Magnetic Separators and Metal Detectors please contact us on:

Other relevant Bulk Goods, Powders and Granules Articles

 

Developing Business in Poland at SyMas 2017

Bunting Support TEKPRO at International Trade Fair for Powder & Bulk Solids Technologies in Krakow, Poland

As part of their export business development strategy, Tom Higginbottom from Bunting will be supporting their Polish distributor TEKPRO at SyMas, the powder and bulk solids trade fair in Krakow, Poland (18-19 October 2017).

SyMas is an international exhibition focused on the processing, transport and storage of bulk goods, powders and granules.  TEKPRO are on stand A68.Bunting_at_SyMas17-2

Company TEKPRO Sp. z.o.o. was founded in March 2007 by Danish company TEKEMAS A/S  and the Swiss Dietrich Engineering Consultants sa .  They specialise in providing individual equipment and complete plants to handle and process bulk materials to the Polish market.

“Attending the exhibition and supporting the TEKPRO team is very important,” explained Bunting’s Sales Engineer Tom Higginbottom.  “Being at SyMas allows us to gain an understanding of the market, meeting existing and potential customers, and discussing the industry in general.”

Bunting_at_SyMas17-1TEKPRO will be displaying Bunting FF Drawer Filters and Grate Magnets on the stand.  Tom and the TEKPRO sales team will be giving advice to visitors about eradicating the problem of metal contamination using both Magnetic Separators and Metal Detectors.

“Over the next 2-days it will be great to have an opportunity to get to know the TEKPRO team.  We will also take the opportunity to provide some additional training.  We are really looking forward to the show, and spending time in a very beautiful city,” said Tom.

For further information on removing metal contamination from bulk goods, powders and granules with Magnetic Separators and Metal Detectors please visit the TEKPRO stand at SyMas or contact us on:

Other relevant Bulk Goods, Powders and Granules Articles